Yamaha Discussions about Yamaha ATVs.

New Raptor problem

Thread Tools
 
Search this Thread
 
  #1  
Old 08-26-2004 | 02:31 PM
rappy660r's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2004
Posts: 19
Likes: 0
Default New Raptor problem

Ok, so it stopped burning oil and the power is back. But my only problem is in 1st gear, I take off and its ine until I push the throttle 3/4 of the way in and it cuts out. It only does it in first gear. No oil burning. Just cutting out. It cant be the jetting because I've never had the problem before up until 2 days ago. Before that, it ran fine. Im confused. Thanks guys.
 
  #2  
Old 08-26-2004 | 02:33 PM
pinheadedjoker's Avatar
Pro Rider
Joined: Feb 2004
Posts: 1,159
Likes: 0
Default New Raptor problem

anyone else in your neighborhood own a raptor?/ if so i would suggest borrowing his cdi box and plugging it into your raptor and see if it still gives you the same problems..
 
  #3  
Old 08-26-2004 | 03:44 PM
rappy660r's Avatar
Thread Starter
|
Weekend Warrior
Joined: Aug 2004
Posts: 19
Likes: 0
Default New Raptor problem

I was just told my float valve could be stuck. And or/ my pilot jet has something cutting it out.
 
  #4  
Old 08-26-2004 | 03:51 PM
RoostItUp's Avatar
Pro Rider
Joined: Aug 2001
Posts: 2,121
Likes: 0
Default New Raptor problem

First gear generally hits the limiter VERY easily. It also shower a jetting problem much easier than the other gears. I'd say your hitting the limiter, if it doesn't have the problem in any other gears I wouldnt worry about it. I can't get passed half throttle on my YFZ in first gear without it cutting out very badly. The gear is so low that it allows the engine to rev to its peak very quickly, thats why it hits the limiter easier.
 
  #5  
Old 08-26-2004 | 04:07 PM
RaptorOwner's Avatar
Extreme Pro Rider
Joined: May 2002
Posts: 3,443
Likes: 0
From: Bakersfield
Default New Raptor problem

Originally posted by: rappy660r
I was just told my float valve could be stuck. And or/ my pilot jet has something cutting it out.
yep, my new 04 acted like that a few weeks back and almost left it at home, but took a screwdriver and put the handle against the carb bowls and tapped it lightly with a hammer on both sides and it all of a sudden ran fine since...
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Firefighter400
Test Your Signatures (sigs) Here!
2
10-08-2022 06:38 PM
Dirtbikemike1
Technical and How-To Articles
10
07-12-2015 07:22 PM
Dirtbikemike1
General Chat
1
07-11-2015 03:36 PM
black_thunder
ATV Videos
2
07-09-2015 05:58 PM
Dirtbikemike1
Other ATV Topics
0
07-09-2015 01:27 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: New Raptor problem



All times are GMT -5. The time now is 03:15 PM.