Will the shift levers from the YFZ450, Raptor660 or other Yamaha's fit on a Raptor350. I'm looking for one that will get rid of the linkage. After moving the shifter up for my riding boots the shifts are sloppy and I some times miss shifts. I have yet to find a aftermarket shifter for the Raptor350. Thanks

 

An aftermarket shifter for a warrior should be the same, shouldnt it? I dont think they changed anything about that part of the quad.

prodesign or roll design make great direct shifters.

 

If your low on funds, IMS makes one too. I have both the IMS and ProDesign and really like the shift of the IMS better. Dont know why but the IMS shifts better for me.

 

I've heard there are some clearance issues with the ims for the raptor, and that they are somewhat fragile. If you can vouch for them, I'll buy one tonight!

 

Got any web sites and part numbers for them? I have found a few of the PrDesign but they did not state if they would fit the Raptor350.

 

Magicracing.com
rockymountainatv.com

and quite a few others sell them.

Some great prices on ebay as well.

 

I saw a few on ebay, but again they only list it as a Raptor and don't define if it is a 350 or 660. Does it matter, will it fit both? Anyone got a part number I could try to match? Thanks.

 

Just bumping this back to the top.

 

The motors between the warrior and raptor 350 are pretty much Identical. if not identical. Get one for a warrior not a raptor.

 

When I have to change mine,I wanna get that flame one in the Raptors new billet section on albaaction.com [img]i/expressions/face-icon-small-happy.gif[/img] way cool!