Again, depending on where you want your power to be made. 34's top end, flatside 30's bottom end

 

HAHA thats kindda funny Cuz bill told me that he would be able to fix thoses cylenders right up,
But oh well, and for carbs, Iam gonna go with whats cheaper, the pj34's or the flatside 30's your right about the flatside 34s being to big
As far as no one around hear, Turner enginering in the city does port work and they are well knowen, So Iam gonna run my motor donw there some time and get them to take a hack at it,...... thats if bill says he cant do anything, Witch he already said he would so i dont know??
I have to motors, so Iam gonna do one to the hill, and keep one stock

 

RZ350s have catalytic convertors huh? you could probably gain 20hp just by ditching them and putting aftermarket pipes on. Be sure to keep them though. Never know when yourll run across a picky inspection person. As for 34mm carbs, I got them on my RD motor and though I never rode it with the stock 28s, it sure does pull hard on bottom end compared to what every said. From what they say I was expecting it to feel like a moped. My friend rode it just after I finished the conversion and said it felt like it could run with the old motor if it never touched the powerband, and thats with drag porting..... soo..

 

Well Me and luke just got home from Valley about 20 minutes. Bull **** you were talking to bill. We asked him about it and he said he didn't even talk to you. He told us to tell you to "shut your mouth" (direct quote from bill). We told him the smack you were talking at. Don't believe me, ask him.[img]i/expressions/face-icon-small-happy.gif[/img] See what he says.
Actually, Im wrong. He said he could do it, but its 500 bucks a hour[img]i/expressions/face-icon-small-wink.gif[/img] and he won't know what he's doing.
Don't try to lie to me seann, I check my facts before I go runnin my mouth. If your so confident that "he told you he would" lets take a run down there tommorw and see what he says face to face, bet your attitude's changing now eh.

You know it's funny everyone knows it dude, your done. I've sat and listened to your for the past week going on about this "motor job" your getting from bill, all along knowing that he didn't even know you. We asked him about your plans, and his responce was "who's seann?" Don't believe me eh. Of course not. Didn't think ya would because thats your attitude about everything. Just like that ol CR eh, jetted right huh. Unfortunally everyone has caught onto your schems and your 15 second RZ, just Im the one that has to break the news to ya. Maybe one day when you can learn to keep your mouth shut until you know the facts. Prove me wrong dude, pipe it, port it, who cares cuz it's not going to happen.
I hope you don't plan on going out for lunch tommorw because we have a trip to valley planned. You, myself, and luke. We'll see what Bill really says about your "done to the nuts" Rz. Funny, looks stock to me.

 

[img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-shocked.gif[/img]

 

haha
I knew you would come back with somthing liek that, Even when i got it you were like ya right you dont got ****, and sure enough i got it, and as far as a 15 second RZ, my rz will run 15 second in the courter mile EASY, and I dont care about this ****, Iam just going buy what bill told me, And if he told you he dont knoe me then hes full of ****, Cuz Iam in there all the time
and he told me he has a few tricks he can do to my cylenders and such, and if it happens to be that he cant do the porting or anything then so be it, I will just take it to the city and get it done, and I will be happy to take a trip to vally with ya ANYTIME you want......... So any way as of right now the plane it to

Bore cylenders to the next size that make them round proble 0.40 because they are at 3 now
port polish(not sure by who now)
V-fource reeds
Wisceo piston and rings (not sure yet on them)
Replace the Street racer clutch(worn out over summer)
Get some head work done, maby new cool head
Pipes if i can find them
and bigger carbs (proble 30FS) So i have been sajusted

But ya any way, If ya dont beleave me that iam gonna get this stuff done the thats cool I understand, Because i never beleave you when you said that you were getting your motor done, But ya did, Alls Iam saing is that when i said i was getting somehting i did, Like the CR and the RZ, The banshees, was a maby and dident pan out, But any way If some one has any helpful coments on getting my rz even faster then would they plese let them rip

 

Congrats.


We'll see.

 

Ya find that stuff out for me and we will be set

 

Whats the news on that HDP stuff chad??

 

Haha...thats entertainment right there...[img]i/expressions/face-icon-small-smile.gif[/img].