programmable ignition system

Reply Subscribe

Thread Tools

Search this Thread

Jan 17, 2005 | 08:04 AM

nitrousoxide

Thread Starter

Trailblazer

Joined: Jan 2005

Posts: 58

Likes: 0

programmable ignition system

I have a programmable ignition system from dynatek(dyna fs).
There is a cable "Tach Output ". For which measurement is it? HP/RPM/speed???
What they mean:"of rev limits tach" / "of RPM switch outputs" / "shift/tether kill input" / " launch limiter"
My english is not so good because of this I place stupid ask.
Thanks for your answer!!![img]i/expressions/face-icon-small-smile.gif[/img]

Jan 17, 2005 | 08:08 AM

D3athShad0w

Pro Rider

Joined: Jan 2005

Posts: 394

Likes: 0

programmable ignition system

Tach = RPM

Jan 20, 2005 | 03:48 PM

brads

Trailblazer

Joined: May 2004

Posts: 28

Likes: 0

programmable ignition system

Quote:

Originally posted by: nitrousoxide
I have a programmable ignition system from dynatek(dyna fs).
There is a cable "Tach Output ". For which measurement is it? HP/RPM/speed???
What they mean:"of rev limits tach" / "of RPM switch outputs" / "shift/tether kill input" / " launch limiter"
My english is not so good because of this I place stupid ask.
Thanks for your answer!!![img]i/expressions/face-icon-small-smile.gif[/img]

Rev Limit = Maximum allowed Engine RPM.
Tach = tachometer = engine RPM gauge
Tach output is a wire that you connect to a tachometer, to see the engine RPM

You still need the Dyna FS programming software?