Yamaha Discussions about Yamaha ATVs.

blaster K&N power kit??

Thread Tools
 
Search this Thread
 
Old Jan 17, 2005 | 09:03 PM
  #1  
Aaron529's Avatar
Thread Starter
|
Trailblazer
Joined: Jan 2005
Posts: 53
Likes: 0
Default blaster K&N power kit??

hey i was just wondering if i got this kit would it b a pain in the a$$ to put in the jet kit bc i really dont no wat the f@ck to do lol
http://www.sweetquads.com/index.php?...=93&prevstart=
 
Reply
Old Jan 17, 2005 | 09:07 PM
  #2  
86LT250RFatty's Avatar
Pro Rider
Joined: May 2004
Posts: 2,689
Likes: 0
Default blaster K&N power kit??

Jetting isnt as hard as it appears. I completely re-jetted my 660R today, Piolits, Air screew, Main jets, Needle and clips. just make sure you have a clean bench and label some stuff you wont remeber. Just take your time and you'll be fine. it took me about an hour from dissasembly to running again. Good luck!
 
Reply
Old Jan 17, 2005 | 09:10 PM
  #3  
Aaron529's Avatar
Thread Starter
|
Trailblazer
Joined: Jan 2005
Posts: 53
Likes: 0
Default blaster K&N power kit??

Thanks a lot but im probaly jsut gonna give it to the yamaha dealer to do it for me if they can
 
Reply
Old Jan 17, 2005 | 10:48 PM
  #4  
VelociRaptor350's Avatar
Pro Rider
Joined: Oct 2004
Posts: 1,356
Likes: 0
Default blaster K&N power kit??

dude you can do it yourself, its super easy, it will probably take you 2 hours at the most and save you the 70 bucks the dealer will charge you.
 
Reply
Old Jan 17, 2005 | 10:51 PM
  #5  
fastblaster00's Avatar
Pro Rider
Joined: Dec 2004
Posts: 943
Likes: 0
Default blaster K&N power kit??

dude its so ez. it took my longer to get the tools and heater out and put htem away than it did to put the jet kit in. i pulled my bike in the garage and within 25 min it was running and tuned.
 
Reply
Old Jan 17, 2005 | 10:54 PM
  #6  
fastblaster00's Avatar
Pro Rider
Joined: Dec 2004
Posts: 943
Likes: 0
Default blaster K&N power kit??

the kits come with instructions. theres like 4 steps. turn gas off. unscrew the top of the car. take throttle cable off. put new nedel in. put it back on. take bottom of the flote bowl off. unsrew it with a 10mill socket. put the new one in. make shore u put the washer back in the spot it came out. put flote bowl on. turn the gas on and turn the air/fule mixture screw all the way in and then 2 full turns out and go from there. its that ez. good luck. its even got pics if u get the dyno jet kit. thats the one i got and i love it.
 
Reply
Old Jan 17, 2005 | 11:30 PM
  #7  
Rem's Avatar
Rem
Pro Rider
Joined: Jun 2004
Posts: 816
Likes: 0
Default blaster K&N power kit??

please dont have the dealership do it! its a great learning experience to do it yourself! and it will save you liek 100 bucks!
 
Reply
Old Jan 18, 2005 | 06:58 PM
  #8  
Shav0's Avatar
Pro Rider
Joined: Jan 2004
Posts: 2,489
Likes: 0
Default blaster K&N power kit??

Yea its easy, assuming you get it right the first time. But what are the odds of that? I would suggest that if you don't know what your doing then don't touch the carb. Read up on it a bit and get familiar before you start diving in.
 
Reply
Old Jan 18, 2005 | 08:14 PM
  #9  
Rem's Avatar
Rem
Pro Rider
Joined: Jun 2004
Posts: 816
Likes: 0
Default blaster K&N power kit??

yea, forgot to mention that though, but its really not a hard thing to do
 
Reply
Old Jan 19, 2005 | 08:02 PM
  #10  
Aaron529's Avatar
Thread Starter
|
Trailblazer
Joined: Jan 2005
Posts: 53
Likes: 0
Default blaster K&N power kit??

lol ok then i guess i wont go to the dealer... ill get one of my good friends to do it for me
thanks a lot guys
 
Reply



All times are GMT -5. The time now is 05:31 AM.