I have an 02 raptor with a full stainless yoshi system. I am at about 1500 feet and run with a stock lid and K&N filter. What jets should I use and what clip should I run on.

I have a friend with a stock raptor and I am not that much faster than him. I run okay most of the time but cut out some at high rpms.

Just want to get the most out of what I have!

 

try searching, i have seen this post 100 times. if memory serves me correct, seems like i used 148/150 dynojets with my yoshi

 

I think a lot of guys run 150-155 mikuni's, 3rd clip, 3 turns out, with no snorkle. I have a Dyno-Jet kit in my 01, 146-148, dj needle on the 3rd clip, 3 turns out, and the fins trimmed out of the snorkle,,,,runs perfect. also, im in St. Louis Mo. which is around 600 ft. in elevation. Bosch