I am getting a dynojet kit,, I currently have a full yoshi tri oval exhaustr, pro flo kit with K&N Filter, the cam mod, and a white bros rev lim. And I was just curious if any of you are running the dynojet, and what you are running for jetting?

Thanks in advance!

 

If it were me, I'd just grab a handfull of jets (165-175 mains, 45-48 pilots, and use the stock needle 5th, or 6th clip position).
At the MOST, you'll need a richer needle (YZ450F dirtbike needle), but I am willing to bet you could still get there or dang close with the stock needle.

Save yourself some money, thats MY opinion.

 

any other dynojet opnions,

2fun- I already have the kit coming, so now I am just trying to figure out where to jet at, and wondering if I need to be different with the cam mod!

 

With a slip on muffler or otherwise exhaust flow improvements, from 0-3000 ft elevation use the DJ144 main. From 3000-6000 feet use the DJ140.

 

I see. Looks like Shadyrascal may already have you set-up!
Anyways, I am not familiar with this "dyno Jet kit", but will say that the cam mod generally requires going up a pilot jet or two from the requirements for jetting without the Cam mod.

The needle might have to be raised one notch from normal also.

 

2 fun thanks for those extra notes, I hope I can it dialed in with the dynojet kit