Yamaha Discussions about Yamaha ATVs.

Need help

Thread Tools
 
Search this Thread
 
Old Feb 13, 2005 | 08:20 PM
  #1  
MrMeaner's Avatar
Thread Starter
|
Pro Rider
Joined: Apr 2003
Posts: 2,506
Likes: 0
Default Need help

A bud sent his stock Raotor carbs to a place in caly to be converted to alky. It has a pipe and no airbox. It wont run mid throttle to wide open just misses. We played with jets all day and it seems to not be getting enough alky. We took the jets out(mains) and still the same. If I put a plastic bag over the filter it runs alot better. Hows that? I cant go bigger than no jet at all. Any alky guys out there that can help? We are going to a big ride in a week and Ive tried all I can think of. Air screws and jetting. We are at sea level. Please any help would be great. Jet size in each or at least a place to start. Thanks
 
Reply
Old Feb 13, 2005 | 08:21 PM
  #2  
MrMeaner's Avatar
Thread Starter
|
Pro Rider
Joined: Apr 2003
Posts: 2,506
Likes: 0
Default Need help

By the way I am running the stock pitcock on it. Going to drill it out tomorrow.
 
Reply
Old Feb 14, 2005 | 04:51 PM
  #3  
MrMeaner's Avatar
Thread Starter
|
Pro Rider
Joined: Apr 2003
Posts: 2,506
Likes: 0
Default Need help

Nobody runs a Raptor on alky. Come on guys I need help
 
Reply
Old Feb 15, 2005 | 12:02 PM
  #4  
CamoKodiak450's Avatar
Pro Rider
Has Been Around Here Quite Awhile!
Joined: Nov 2004
Posts: 880
Likes: 0
Default Need help

Sounds like you need to raise or lower the clip on the needle.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 09:27 PM.