660 raptor trani
#1
hey guys i have a 01 raptor and when i put it into reverse it sometimes goes in fine and other times it liek goes clunk clunk clunk then it pops in. sometimes when i start it up and it dosnt start up right away and i let of the starter it makes the same clunk noise like some one is hitting it with a hammer. i know some 01s had trani problems but how do i now if mine is going to go or what.
help please
help please
#2
The starter clunk is somewhat normal. Both my warriors have the infamous cluck from the starter seloniod. The revers sound like you have a bent tooth. That is bad as it will eventually break and then its time for a new tranny
Aaron
Aaron
#4
I've got an '04 Raptor, same as my older brother, they both sometimes don't go into reverse, or in and out of neutral completely. All we have done so far is too put up with it, let your clutch out slow....if you here that cluncking, bring it back in....shift up or down, rock back and forth, put it back to the gear you want and try it again....far as we've found so far nothing has been wrong. For some reason they just seem to be a little loose...
If anybody had any info on that, I'd like to get this one straight as well....?
If anybody had any info on that, I'd like to get this one straight as well....?
#5
Originally posted by: rutelis
one way starter is shot...i had same propblem ...get a l&a design starter
one way starter is shot...i had same propblem ...get a l&a design starter
Mine does the same thing.. ive lived with it for a year though.. bout 500 milies on the damn thing same oneway..clutch..and other shiz.. i had the one way and clutch replaced 500 miles ago and its almost about time for new one way.. why not clutch at the same time.. lol
#6
alright maybe some day i will rip into it and find out what the prob is.
is it me or is it sounding like all the raptors have trouble with going in or out of reverse
o well i still luv the thing!!
is it me or is it sounding like all the raptors have trouble with going in or out of reverse
o well i still luv the thing!!
#7
yea my tranny does the same thing, every thing works perfect on it besides that. sometimes it will clunk with out engaging, i just let the clutch out a little and it popes in. Just push down on the shifter a couple of times, and let out the clutch slowly untill you hear it engage.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
Sep 13, 2015 12:30 AM
Alex Rodak
Yamaha
0
Sep 12, 2015 09:39 AM
Alex Rodak
Introduce Yourself
0
Sep 11, 2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



