riding on unjetted mods
#1
so i put the twin k&n filters on my banshee, didnt rejet and rode around on them for several hours... 5 to be exact. After one of the rides, i was almost empty on coolant. It starts fine and crap..... but i think I might have done some damage that is gonna show on my next ride... due to this lean mixture... what are your guys thoughts?
#3
is the bike piped, or still stock? If it is stock, you are well within limits for being ok. Lots of air in but still very restrictive going out. even if it is piped you should be ok. But rejet that bugger in a hurry
Aaron
Aaron
#5
yes... i rejetted after all mods except for the filters... its just the only thing that scared me was the fact that my coolant was pretty much empty... so i pissed in it and rode back to camp. haha
#6
If the coolant is evaporating and not just leaking out then either you have your mix wrong (too much af and not enough h20), or your machine is running hot. If its running hot is probably lean...
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
Apr 9, 2020 11:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




