Originally posted by: raptorider660
y would i do that to waste my time u wouldnt beat me anyway so wats the point blasters are slow just to let u know

Originally posted by: raptorider660
i will eat it up for breakfest

Originally posted by: Warrior02man
bring that 01 TRANNY PROBLEM PRONE CRAPTOR to Scituate RI and ill toast you... ull b a piece of cake.
Craptors r just oversized machines that are not needed and top out at like 74 stock.. mines 78 biatch.. so bring it on.
-edit- and take me on trails? ha.. forget it.

As for that Blaster.. it looks rly nice!

Originally posted by: YBlasterboy
it doesnt matter about whos quad is faster ITS THE RIDER and raptorrider660, why do u have to go say something to pi$$ him off, i just dont get why someone would go talk crap like that 4 no reason.

Originally posted by: Banshee392

Sure, but your raptor is narrow and cannot handle the turns like mine can and while your on two wheels ill be lapping you. And wait til I get my engine tricked by HWD, you won't even have a chance.

Strongtyer I don't ride much, only like once a month..[img]i/expressions/face-icon-small-sad.gif[/img]

Originally posted by: Banshee392
I just used one of those wire brush attachments that you put on your drill and lightly polish it, and then fliish it up by applying mothers and using some elbow grease about five times.

Or you can do it the longer way:

You will need Paint Stripper, 1500 grit wet sandpaper, a bucket of water, and fine steel wool, And some real good compound wheel polish..Not the spray stuff get the wax. a small paint brush, and a roll of shop towles

1. Take off the foot peg so you can easily get to the clutch cover. leave the spring on it so it will just hang out of the way

2. Apply some paint stripper to the area you want to strip..Use the small paint brush to get around the letters so the stripper won't take the black off there..If you happen to get some inside the letter's just wipe it out real fast with a wet rag and you will be kool. I used a thick kind called airplane strip that i got at autozone so it wouldn't run into the yamaha letter's. Wait about 20 minute's so it will really get the majority of the paint off..Come back and wipe off the paint with a wet rag..There will still be a few spot's of black..Just add some more stripper and wait a minute for it to bubble up and you should be cool..

3. after you got all the paint off you want Get the 1500 grit sandpaper and the bucket of water and start going to town on it in circular motion.(the longer you do this the better it will look and more shine it will have..After you have did that till your elbow is about to fall off get the fine wool and start in with it in the same circular motion.(you will really start to see the shine coming out after about 10 minute's of this)

4. After you have got the desired finish get the wheel polish and apply it and buff that mother fuaqer like it was a 20' wheel :-) (after i did that the **** was shining like crazy.

5. Put the foot peg back on and your good to go..If you want you can give it a spray of clear coat but it's not a have too..

Hope that help's you out man..20 buck's is what it ended up costing..good luck

^ Thanks Lethaface

Originally posted by: Speedy2222
them balsters... all show no go...