i own a raptor 660 and i am getting a 686 kit put in it and i am porting it has any one done this or heard about it and is it a good idea? will i get alot of performance? let me now



thanks

 

Yes sir, I havent had it done personally. But, I have run against some very strong 686's....its according who is doing the work![img]i/expressions/face-icon-small-wink.gif[/img]

 

i have a racing company doing it right now they are strickly raptors and thats all they do so i am feeling really good about it since u say that it is good


will i still be able to ride trails to?


thanks

 

Well, now just because its a racing company doing the work doesnt necessarily make it good. I have ran against some 686's that wasnt too impressing...then, I ran against some that I didnt really believe were 686's. LOL! But, as far as riding trails...as long as its a low compression 686 I dont see why you couldnt ride trails. You have a lot of variables whenever you just say 686! You can get a mild or wild 686!

 

I LOVE my LCC 686. It was built by Craycraft Racing and is everything the doctor ordered.I ride trails with it most of the time here in the Phoenix area and I drag race it at the dunes alot as well. It always starts and never gets hot. Recently I had the oppertunity to convert it to a 730 but decided to keep it as a 686. It is the most reliable engine I have found for the Raptor as far as building a motor. Some will disagree but thats my 2 cents worth. It has a 10.75 to 1 Ross piston with a Stage 2 Hotcam, Ported/polished, Barker Rod, balanced crank and stainless steel valves. This motor allows me to run 87 octane pump gas . I like that My videos page..

 

ok that sounds good thanks for your guys help i really apreciate it.

i hope i get a good deal on the kit and it works great.



thanks