Yamaha Discussions about Yamaha ATVs.

captor raptor

Thread Tools
 
Search this Thread
 
  #1  
Old 09-19-2005, 11:40 PM
danny55's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2005
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

i have a 02 raptor with what i think is carb. problem. can anyone tell me of someone that real knows his stuf about the carbs. ????????
 
  #2  
Old 09-19-2005, 11:47 PM
raptorider660's Avatar
Pro Rider
Join Date: Jan 2005
Posts: 513
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

ask the question
 
  #3  
Old 09-20-2005, 12:01 AM
danny55's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2005
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

HAVE THIS 02 RAPTOR THAT WAS RODE 3 WEEKS AGO AND RUN FINE. WENT TO START IT SAT. AND IT WILL NOT RUN IF YOU TAKE THE CHOKE ALL THE WAY OFF. IF YOU LEAVE IT ABOUT 1/2 WAY IT RUNS OK. I TOOK THE CARBS OFF AND TOOK THE JETS OUT AND CLEANED AND USED HIGH PRESSURE AIR TO BLOW THROUH THE PASSAGES. STILLS DOES NOT RUN. PUT NEW SPARK PLUG IN, CHECK THE VALVES, CHECK THE COIL, UNHOOKED THE PARKING BRAKE AND CHECK THE PLUNGER, CHECK ALL I CAN THINK OF. WHEN TRYING TO GIVE IT GAS IT POPPS OUT THE EXHAUST. I AM ALLMOST SURE IT IS IN THE CARBS. AND IS A LEAN PROBLEM. I DO NEED SOME HELP PLEASE.
 
  #4  
Old 09-20-2005, 01:55 AM
quadbike's Avatar
Pro Rider
Join Date: Apr 2005
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

What does the plug tell you?
 
  #5  
Old 09-20-2005, 02:03 AM
GYTRaptor's Avatar
Trailblazer
Join Date: Apr 2004
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

sounds like your mixture screws got tweaked some how, I had the same issue but have no idea how it ever happened.. ran fine one day and horrible the next. Turns out my mixture screws got tweaked and was running super lean
 
  #6  
Old 09-20-2005, 02:12 AM
LTZ's Avatar
LTZ
LTZ is offline
Extreme Pro Rider
Join Date: Dec 2002
Posts: 3,718
Likes: 0
Received 1 Like on 1 Post
Default captor raptor

Parking brake, exhaust leak or carb boot loose/off???
 
  #7  
Old 09-20-2005, 09:26 AM
Fahq's Avatar
Pro Rider
Join Date: Aug 2004
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

Before you go changing mixture screws, drain the gas, pull the carbs and clean the jets. There are no fuel filters on Raptors. It is common for a little piece of dirt to clog one of them. Then, with one carb plugged, the bike will run on full choke but, fall on its face when taken off.
I doubt your mixture screws changed when you weren't looking.
Good luck.
 
  #8  
Old 09-22-2005, 07:42 AM
sixsixT's Avatar
Extreme Pro Rider
Join Date: May 2002
Posts: 3,286
Likes: 0
Received 1 Like on 1 Post
Default captor raptor

It sounds like a clogged pilot jet.
 
  #9  
Old 09-22-2005, 12:41 PM
Dwags's Avatar
Pro Rider
Join Date: Apr 2005
Posts: 296
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

i have to agree with the jets problem. i had a similar prob. cleaning the jets fixed it
 
  #10  
Old 09-22-2005, 01:00 PM
BloodyRomance's Avatar
Trailblazer
Join Date: Jul 2005
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
Default captor raptor

and once youve cleaned em all really good again, go to your local auto parts store and buy an in-line fuel filter. they are about 2 bucks i think and they do alot for keeping junk out of your carbs.
 


Quick Reply: captor raptor



All times are GMT -5. The time now is 11:52 PM.