Finally got all the fluids in, tried to kick it over and nothing. sprayed starter fluid in the carbs and it starts (have exhaust from both sides) then shuts off. tried again and right side stops firing. (no exhaust) and i cant give more gas, boggs down. i open the carbs and bowls are clean and have gas. i found the tube that goes from one carb to another disconnected, but i might have done it. any suggestions?? bike has been sitting for almost 2 years, spark plugs are next and just flushed the tank

 

The tube that runs between the carbs is the choke tube.
If you put the choke tube back on and it doesn't run,it is probably the pilot jets plugged.......





later
Mark

 

Hey Mark whassup man!

 

Not much,trying to get back to normal after Rita.How did you weather the storm? That is alot of time and money you sank into the shee just to turn around and sell it.We need to hook up and ride before it gets to cold.

 

Yeah man, you're telling me...but I gots to.But I totally agree We need to go rip it up real good before winter sets in.But if you would smy shed you'd think that my bikes are demolished!!!!There's a big ole live oak chillin on it rite now ...and my insurance adjuster is taking his sweet time[img]i/expressions/face-icon-small-sad.gif[/img]I haven't ridden in almost 3 months because of his lollygagging!!!!!! Hey how bout the beach(es)?Are they ridable or r they covered in debris still?

 

Ok im down to almost getting the damn thing to work right... i have too much fuel going to the carbs. it starts and idels but when i give it gas it boggs down like there is too much gas and wants to shut off. what size of jets do i need if it has t5's and a cool head. not sure what dome. or is there a way i could restrict the gas thats going to the carb without changing jets?

 

Unplug the t.o.r.s and see what happens

 

Man I hear ya,my adjuster hasn't came by either.What you gunna do with the paddles?

 

did that, i guess the last resort would be to overhaul the carbs

 

If it's been sitting for 2 years just buy a carb kit(s) and rebuild it.