I got a deal on a 2000 Banshee because it was in several pieces. Got it all back together and running great, but there are two hoses I don't know about. One comes from the right front of the crankcase and the other comes from the rear. They are connected (blow in one, it comes out the other, going though the crankcase/gearcase, smells like oil). I am assuming these are simply vent hoses for the case but can anyone tell me where they go? Maybe even a picture? Thanks.

By the way, I've had a lot of quads but this is my first Banshee. Good Lord! Scary fast!!!

 

the hoses you are talking about are crankcase vent hoses. there should be another long hose from the tee they are connected to that follows the same rought as the accelerator cable and hoses from the overflow bottle throught the loop in the frame in front of the gas tank. from there it goes up and follows the loop for the steering stem then through another bracket on the right hand side of the bike next to the coil along with the radiator overflow hose.

Hope that helps

Later

 

True that.

 

Thanks guys, its missing but I can certainly make my own. Good description.