01wolverine squeaks when backing up
#1
#2
#4
#5
01wolverine squeaks when backing up
The bolt that drac1 is talking about goes right through the center of the arm that the emergency brake cable is attached to. There is a spring on the other side of the arm. Try backing off the lock nut and loosen the bolt up 2-3 turns. If it helps and you use your E-brake, you will have to adjust it again. If you're like the rest of us, you gave up on the E-brake long ago.
The rear axle bearings are also likely candidates. My right side was sloppy like yours, but the left side was shot as well. I don't remember mine making any noise though.
The rear axle bearings are also likely candidates. My right side was sloppy like yours, but the left side was shot as well. I don't remember mine making any noise though.
#6
01wolverine squeaks when backing up
well when i went out to see what it waz i greased the drive shaft zerks and lubed all pivit points,then to it for a smach . i think it waz the front drive shaft that needed greasebecause when i took it out its ok (but not with plow lol)so i will test it today seeing i cant get out my front door lol.try all night to think of a way to angle my plow without getting of ,ok im lazey lol but had it all sorted out .went to where i worked for 18 plus year to get some bike parts,brake cable housing leaver and some small pullys ,o well this will give me something to do at nights.the only thing is the leaver doesent move side ways .later dave r cooke
#7
Trending Topics
#10