Ok so i am fixing the starter on an 01 raptor and I tourqued all the bolts and got everything in check, and now i lost some bolts. On the cover, I have all of the bolts but one of the dowel or pin things that go into where the oil line feeds into is gone. I thought It may have gotten into the motor, but I checked there with a magnet. Could it still be in there? I plugged up the hole right after I got the flywheel off

Then I was putting on the cover, because I figured I could use 2 of those dowel things if I put them where the O rings need tio be and my brand new gasket rips. Can I still use the gasket?, also, when I spin the starter gear3 with my finger, it goes great but makes a little ting noise. Is that bad?

Thanks guys, and sorry for the long post...

 

Anyone??