Quick Question?!?!?!?
#1
#2
Quick Question?!?!?!?
You should probably put a slightly richer jet in it. Air temperature affects jetting because colder air is more dense, and therefore requires more fuel to go along with the extra oxygen. Take your spark plug out, and look at the tip. If it's white or very light colored you need to richen up the mix. If it's tan you're ok
#3
Quick Question?!?!?!?
Originally posted by: recon99
You should probably put a slightly richer jet in it. Air temperature affects jetting because colder air is more dense, and therefore requires more fuel to go along with the extra oxygen. Take your spark plug out, and look at the tip. If it's white or very light colored you need to richen up the mix. If it's tan you're ok
You should probably put a slightly richer jet in it. Air temperature affects jetting because colder air is more dense, and therefore requires more fuel to go along with the extra oxygen. Take your spark plug out, and look at the tip. If it's white or very light colored you need to richen up the mix. If it's tan you're ok
#4
Quick Question?!?!?!?
Rejetting IS how you adjust A/F ratio! The fuel screw only adjusts the ratio at idle, so you'll need to adjust that along with the main jet, and maybe the needle setting too. The needle setting isn't as touchy as the idle circuit and the main, but sometimes it still needs adjusted.
Thread
Thread Starter
Forum
Replies
Last Post
Logan Collins
Classifieds, Garage Sale & Swap Shop
0
09-05-2015 08:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)