Yamaha Discussions about Yamaha ATVs.

molases

Thread Tools
 
Search this Thread
 
Old Mar 1, 2006 | 12:36 AM
  #1  
pokeybrn's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2006
Posts: 4
Likes: 0
Default molases

i want to know if there is any thing that can be done to speed up bruin 350 4by4 ;is there any kind of resrictor plates or any thing like that that can be removed
 
Reply
Old Mar 1, 2006 | 12:40 AM
  #2  
DavidLT250S's Avatar
Pro Rider
Joined: Dec 2004
Posts: 1,069
Likes: 0
Default molases

you can take the baffle out of the muffler but its going to be loud
 
Reply
Old Mar 1, 2006 | 01:05 AM
  #3  
pokeybrn's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2006
Posts: 4
Likes: 0
Default molases

don't want to go deaf was hoping that ter might have been factory carb limiter or somethin like that getting blown away by rancher thanks for help though
 
Reply
Old Mar 1, 2006 | 01:22 PM
  #4  
DavidLT250S's Avatar
Pro Rider
Joined: Dec 2004
Posts: 1,069
Likes: 0
Default molases

there is also an idle sqrew right along side of the right brake leaver(where the gas is) its just a sqrew and you can unsqrew it abit it should give you a little big more to get up and go if ya know what i mean but don't take it out too much because it'll be idling really high if you want more power buy a pipe and K&N air filter should make the bike run nicer also
 
Reply
Old Mar 2, 2006 | 09:51 PM
  #5  
RUFFCOUNTRY's Avatar
Range Rover
Joined: May 2005
Posts: 152
Likes: 0
Default molases

if you remove the restrictor plate you will have to change the flux capacitor
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 05:10 AM.