rite i crashed my raptor into a car at 40mph ,it heldup pretty well the left lower a arm is bent tho, i hav ordererd a new one from the good ol u.s.a (im in the u.k) costin less than half the price wiv shippin included, i hav had the exisiting a arm repaired by a fabricator for the time being until new part arrives ,they have done a pretty good job or repairing it but it is pulling to the side a bit do you think replacin the arm will fix this problem or could there be another problem, also bumper mounts bent but they are welded to the frame wat can i i do about that? i'm gutted just got it back after havin beeen at dealers for a month i got the lte duals dobeck dna filter kit she roars also plus 4 axle on road on hiper rims looked lovely i got videos n pics i will put if if i can work it out lol , any help would be very much apreciated

 

The arm will never be straight again, thats one problem. 2nd thing to look for is the toe in settings. Im sure the tie rod was bent. If not, the lower arm is putting the toe out of adjustment. Id put a new tie rod on with the lower arm and realign it.

Is the frame itself bent? If so your gonna have a tough time getting the bike to go straight again. If you look, on Ebay there are a set of "Full Flight" arms that have adjustments and all the pivot points to get you straight again.

Cut the bent mounts off for starters. After that you can have custom mounts made, with a custom bumper, or just have the bumper welded to the frame.

 

hi mate frame is looking straight the bumper absorbed the damage ,that bumper is strong let me tell you lol not even a scratch i guess i'll get mounts made up i think shock may be bent ,i'll replace wiv 450 shocks soon then if thats the case i will get tie rod too then ,thanks mate