just ordered 13 tooth for my raptor 700
it will be here on thursday of next week.
what kind of a difference should i expect. my raptor is bone stock right now which i am ashamed to say. am i going to need to get a power commander now or will everything still run fine as it sits? |
just ordered 13 tooth for my raptor 700
why would u need a new power commander for a sprocket change?
|
just ordered 13 tooth for my raptor 700
yeah u dont need a powercommander, u will have more take off.
|
just ordered 13 tooth for my raptor 700
i didnt know if i would or not that is why i am asking, i know nothing really about these quads. how big is the difference going to be? also is this a good gear for trail riding? how much top end am i going to lose? and lastly my friend has a 700 and right now we are neck and neck racing, what will be the out come now?.
sorry its so long, thankyou everyone for all your help. |
just ordered 13 tooth for my raptor 700
im not sure what size u are using right now but in the front every tooth u drop u loose 5 mph, so u should leave him off the line but he will catch up.
|
just ordered 13 tooth for my raptor 700
Yea you will have alot more torque then what you had if you are dropping a tooth but what I would do next is prob get a pipe, filter,and a programmer...then I would get some tires for the raptor and you should see a large inscrease in the quad overall
|
just ordered 13 tooth for my raptor 700
I've heard it alleged that you might GAIN top end by going down a tooth. The theory is that wind resistance and the rider/machine wieght prevent you from hitting the rev limiter in 5th with the stock gearing. I'ts geared too tall from the factory. Dropping a tooth and reducing the gearing should overcome this, allowing a HIGHER top end.
Dropping a tooth on my 660 made it go faster than I want to go. |
just ordered 13 tooth for my raptor 700
trapland,
i have stock gearing, I HATE HOW TALL IT IS... what front sprocket should i get one down right? what is the stock gearing? will i lose a ton of top speed? |
just ordered 13 tooth for my raptor 700
I have a 05' Rappy that I geared down. First I went smaller in the front one tooth, but changed it to one bigger in the rear. It wasn't such drastic change with the bigger rear.
|
just ordered 13 tooth for my raptor 700
will my stock chain handle a one size bigger rear sprocket?
|
just ordered 13 tooth for my raptor 700
I put a 13 on mine and took it off the next day..makes 1st gear usless and revs through the powerband to quick....u might like it though....its quick on take off ,,if u can keep the front down through 4th
|
just ordered 13 tooth for my raptor 700
the 700r gearing is different than the 660, most are going to a 15t, read the forums at raptorforums.com
|
just ordered 13 tooth for my raptor 700
After you change your sprocket have someone check your top end with either a radar gun or a GPS. My top end this past weekend on my completely stock engine 06, 700R was 73.4 MPH using a GPS on a Dry Lake bed. I was wearing all my riding gear and my weight is 195 lbs. For trail riding stock is fine for me. 2nd gear is plenty and I only dabble with 3rd gear for very short sprints. A smaller sprocket is going to really help you in a drag race but you'll be running up the RPM's quickly. Like chip700r said, "Makes 1st gear useless." Report back to us when you make the change. Let us know how you like it. Good luck.
|
just ordered 13 tooth for my raptor 700
Yes, you can use the stock chain.
|
just ordered 13 tooth for my raptor 700
i think im just goin to go up one in the rear i just want a little change.. thanks
|
just ordered 13 tooth for my raptor 700
1 down on the front on a 660 makes for great gearing..u pick up take off but dont really lose much top end.....the gearing on a 700 is totally different.1 down in front on a 700 didnt work for me
|
just ordered 13 tooth for my raptor 700
I downed my rappy to a 13 tooth for harescrambles. I love it. It is super torquey but i love having the snap. I dont run as fast but i can get there just as fast or faster than the 450s.
|
just ordered 13 tooth for my raptor 700
Originally posted by: paintballbanshee trapland, i have stock gearing, I HATE HOW TALL IT IS... what front sprocket should i get one down right? what is the stock gearing? will i lose a ton of top speed? One tooth in front should be like 3-4 in back. |
All times are GMT -5. The time now is 05:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands