I just put on my GYT-R blue strobe graphic kit and man does it look good. I'm working on the seat cover now so I'll let you know how it turn's out. Make sure you take your time putting on the tank decal it's big and akward. I found that spraying a light mist of windex on both the decal and the plastic seem's to work best. Notice I sadi light. If you put too much on you'll spend all day tryin to get the decal's to stick. What I did was I laid the decal's on a flat surface and sprayed the windex about 3 feet above and let it fall down on it. I also just had my firxt choke cable probelm, but I was riding through ice and snow so I guess the cable just got some moisture on it because once I turned the heat on I loosened right up. Once I get it all done I will be happy to send pic's if anyone would like to see it.

2001 Raptor Blue
GYT-R CHASSIS SKID
GYT-R SWINGARM SKID
GYT-R A-ARM SKID
GYT-R HEADLIGHT GUARD'S
GYT-R HEEL GUARD'S
GYT-R SHOCK COVER'S
GYT-R BLUE STROBE GRAPHIC KIT & SEAT COVER

 

You should of put your seat cover on first.. Now it might not line up right. People were syaing a few weeks ago to use windex. I will try it when get mine.

 

trust me the decals only give very little room to move them on the bike I'm sure it will line up fine or close enough it won't matter cause I'll be going too fast anyway