Will a Rear shock off a Blaster work on a Raptor 350/warrior? I think the the Raptor length is 11 3/4(its hard to measure so i'm not sure) and the Blaster length is 14 something. Will the shock work? I dont want the rear end to be way up there. I can have someone machine a different Linkage/J hook for me if that will help.

 

why? it'll ride like royal ***

 

all of the 350 raptor shocks are alot better then a blasters. i but the raptors shocks on the blaster. at my job we have a 350 raptor and a blaster so i can tell ya if they may fit tomorrow after work.

 

That's like taking the shocks off of a Pinto to put them on an Escalade. It may work, but that shock was not designed for it. Remember a Raptor 350 is longer and heavier than a Blaster. Even if you found a deal on a Blaster shock, I would stick with the 350 shock, or if you want to upgrade get a shock from a 660 or better. I would say a Blaster shock would be a downgrade, even if it was a Works or Elka.

 

It is a Works. Its perfectly valved for my weight. Front Elka's go on tommorrow so I'll see how those go. Thanks exrider let me know what you find.

 

Why would you want to do that? Blasters are known for there horrible shocks.

 

its a works shock no way in hell would I put a stock on.

 

Im going to start this up again. On my warrior I want to do the opposite I want to put a Banshee or Raptor rear shock on (mines toast). Anyone done it or have any INTELLIGENT suggestions.

 

Hows that the opposite?

 

<div class="FTQUOTE"><begin quote>Originally posted by: RhinoWarrior

Im going to start this up again. On my warrior I want to do the opposite I want to put a Banshee or Raptor rear shock on (mines toast). Anyone done it or have any INTELLIGENT suggestions.</end quote></div>

sorie. I wood hel p butt I not INTELLIGENT enuph.