help! Raptor 680 Big Bore
#1
I hope somebody can help me here, I don't have enough money to take it to the dealer, I got a really good deal on a 01 Raptor, with all kinds of goodies. Big Bore kit, cam, all the good stuff. I bought unwisely, thinking I was getting a good deal. The machine is a little ragged out, when I bought it, it would try to crank, but wouldn't like it had a dead battery.
Come to find out, that was not the problem.
After taking the head off, the cam chain was in extremely bad shape. I replaced with a new one, and put back together, she cranked awesomely before I put the fuel tank back on, once I got it together, it cranked and fired right up, ran like a raped ape, but when I shut it off and tried to restart, it started doing the same thing. If I mess with it for awhile however it will start.
What else should I be looking for, or is it just because of the high compression?
Thanks so much your help will be greatly appreciated!!
Come to find out, that was not the problem.
After taking the head off, the cam chain was in extremely bad shape. I replaced with a new one, and put back together, she cranked awesomely before I put the fuel tank back on, once I got it together, it cranked and fired right up, ran like a raped ape, but when I shut it off and tried to restart, it started doing the same thing. If I mess with it for awhile however it will start.
What else should I be looking for, or is it just because of the high compression?
Thanks so much your help will be greatly appreciated!!
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
Sep 25, 2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




