does anybody know what the oil pressure is on the wolverine and what kind of oil cooler i could use? mine got broken

 

I know you could use a oil cooler off of a Big Bear, you can check out woodwarrior.com but id only use that for research, getting someone to answer your thread is damn near impossible and will only have you more upset.

 

Don't be so down , mechanicok, depending on the topic, the answers will vary quite a bit!!
dkhead, used Wolverine oil coolers are not real hard to find, look on ebay, I used a Kodiak 8 pass oil cooler on my Wolverine when I put the big bore kit in, it has over twice the area of the 3 pass stocker. It just takes a little bracket modding to fit, and I added some grill plate to protect it. Best thing is it uses stock fittings and is pretty much a bolt in. I'd sell you my old 3 pass, but I'm thinking it will make a good emergency spare incase of damage to the new one.

 

Not being down sir, atv connection is the place to post if you want responses,

woodwarrior.com on the other hand is not. I was hopefull that site would have a good forum but its more like a ghost town with tumbleweed and a drunk sheriff, but like i said there is alot of good information on that site concerning the pre 06 model wolverines. I wish every forum could be like ATV Connection, this site rocks IMHO.