Was wondering if it was possible to put a Raptor 700 swing arm on a 660.thanks in advance!! it would make life easier for ajusting chains and more...

 

I didn't think it was that difficult to adjust the chain on a 660? But anyway, looking at the microfiche diagrams, it appears it might bolt onto your chassis, but looks like the bearing carrier is different, so you might have to have a 660 bearing carrier and axle. http://www.ronniesmailorder.co...che_section_detail.asp You can go here and select your model for a complete break-down of your machine, and the 700. The 660 swingarm is part # 1S3-22110-00-00, and the 770 arm is part # 5LP-22110-10-00.

Before you rig that up, an aftermarket swingarm, like from Lonestar might be the answer.