Yamaha Discussions about Yamaha ATVs.

Has your Raptor raced a DS650?

Thread Tools
 
Search this Thread
 
  #1  
Old 02-10-2001, 04:25 PM
atv2001's Avatar
Weekend Warrior
Thread Starter
Join Date: Feb 2001
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Tell me your racing story.
 
  #2  
Old 02-10-2001, 07:25 PM
No2StrokeBs's Avatar
Pro Rider
Join Date: Jan 2001
Posts: 692
Likes: 0
Received 0 Likes on 0 Posts
Default

When my Raptor was bone stock I raced a DS that was stock. Raptor will beat it for the first 4 gears, but the DS beat me on the big end by about 3 mph.Now I have full exhaust, air filter, jetting and 14 tooth front sprocket. DS has Greydon pipe, K@N, bigger carb, jetting, and different sprockets(not sure what tooth he runs though). Now the Raptor beats it through the gears all the way to 5th then they stick pretty close, its just that the DS is about 10ft behind me now.But dont believe the hype, the DS is a strong quad, it is just to heavy, but dont underestimate one that has the same mods that a Raptor does.
 
  #3  
Old 02-10-2001, 07:35 PM
SykoQuadRider's Avatar
Pro Rider
Join Date: Jan 2001
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
Default

I have raced one DS650 when i had a 13t sprocket on my Raptor and I would pull way a head at the begging and get good ebough lead to beat him all the way. The DS is closer than any other stock quad thjough. The race was about 700-800feet .
 
  #4  
Old 02-11-2001, 02:45 PM
rraptorr13's Avatar
Pro Rider
Join Date: Nov 2000
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default

First day out with my raptor bone stock. DS had heavy mods ,but I never really saw him after i hit the gas.

I didnt even really let it rev out because the machine didnt even have an hour on it
 
  #5  
Old 02-11-2001, 05:59 PM
RAPTOR1's Avatar
Range Rover
Join Date: Sep 2000
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default

I have NEVER even seen a ds anywhere we ride let alone race one. I'm not so sure that the ds even exists in Ohio so far.
 
  #6  
Old 02-11-2001, 07:58 PM
SykoQuadRider's Avatar
Pro Rider
Join Date: Jan 2001
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
Default

Today I went riding on My Raptor and raced a DS650. I have a 12t sprocket that slows me down quite a bit on top end, but helps a little low end. We raceds several tims and it all depended on who got the better start. A few times when we both got good starts I would pull way ahead then on top he would catch up b/ of his better top end since I have the 12T sprocket. The DS650 is a awesome quad, just too big. Hope Bombardier learns form their mistakes.
 
  #7  
Old 02-11-2001, 08:05 PM
atv2001's Avatar
Weekend Warrior
Thread Starter
Join Date: Feb 2001
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

to big? naw, why you think mods are made to make the Raptor as big as a DS? They could make mods to make a DS smaller!
Bigger more stable for baja type racing, smaller better for woods & MX racing.
Depends on what matters most to you.
 
  #8  
Old 02-11-2001, 08:50 PM
SykoQuadRider's Avatar
Pro Rider
Join Date: Jan 2001
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
Default

It is too big in the air and with no reverse it sucks . other than thats the machine is awesome,
 
  #9  
Old 02-11-2001, 10:56 PM
NewDSLover's Avatar
Pro Rider
Join Date: Dec 2000
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default

I got one! Wanta Race!
 
  #10  
Old 02-11-2001, 10:57 PM
NewDSLover's Avatar
Pro Rider
Join Date: Dec 2000
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default

I can almost see your nose growing from here.
 


Quick Reply: Has your Raptor raced a DS650?



All times are GMT -5. The time now is 06:54 AM.