what's up guys new here just thought i would share some info on what i thought was a bad one-way.Bought the l&a designs kit poped the flywheel and to my surprise not the one-way at all but the six bolts holding the one-way to the flywheel were all shered off and the one-way was no longer attached to the flywheel.I managed to fish the six bolt heads from the bottom of the engine hopefully no damage was done there?.I also got the rest of the threads out of the flywheel without any damage done as there was no loctite used on the threads when there should have been.Moral of the story check before you buy and use loctite on the bolts!

 

lol i had the same thing happen on my raptor about a year ago, yamaha shop did to me but luckly they agreed to fix any damage