08 Wolverine with 50w 4300k Hid
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I just finished installing a 50w Hid kit in my 08 Wolvy, and I was nervous the stock wiring wouldnt be able to handle the power but so far so good. I let the system run for 45minutes with no apparent ill side effects, all the stock wiring was running cool and the housings were fine. The wolvy to the left of the picture is bone stock with stock lights on high, and the one pic with the light hitting the wall for comparison purposed completely over took the stock wolvys lights and you can barely see them to the right of the wall.
Last edited by Ninty5Wolverine; 09-14-2009 at 11:33 AM. Reason: Mispelling
#5
#7
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
nice so you got them on ebay?do you have to splice any wires?
Yeah its just a genric kit off of ebay. It was $88 buck shipped. You can find kits advertised as plug and play for our atv's but i couldnt find one that was rated at the 50w. Now that I have them installed I think it might be over kill, the regular 35w kits are probably fine too.
![Thumbsup](https://atvconnection.com/forums/images/smilies/thumbsup.gif)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)