Yamaha Discussions about Yamaha ATVs.

2009 grizz runs rough

Thread Tools
 
Search this Thread
 
Old Jul 26, 2010 | 12:35 PM
  #1  
mick4whlr's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2010
Posts: 5
Likes: 0
Default 2009 grizz runs rough

2009 grizzley does not run well in 2 or 4 wheel drive (misses). Runs good in 4-wheel dif-lock. Anyone have any ideas??
 
Reply
Old Jul 26, 2010 | 01:15 PM
  #2  
DODGE57HEMI's Avatar
Extreme Pro Rider
Mopar Man!
Joined: Jan 2008
Posts: 6,333
Likes: 0
From: Colorado Springs Co
Default

First welcome to the forums! How many hrs on the quad and when is the last time you went through deep mud or water?
 
Reply
Old Jul 26, 2010 | 01:25 PM
  #3  
mick4whlr's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2010
Posts: 5
Likes: 0
Default

little over 200 hrs and went thru somewhat deep water 2 weeks ago
 
Reply
Old Jul 26, 2010 | 02:02 PM
  #4  
DODGE57HEMI's Avatar
Extreme Pro Rider
Mopar Man!
Joined: Jan 2008
Posts: 6,333
Likes: 0
From: Colorado Springs Co
Default

I would start with a fresh oil change and new spark plug if you have not done so! You might be at risk of slight engine damage!
 
Reply
Old Jul 26, 2010 | 06:01 PM
  #5  
mick4whlr's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2010
Posts: 5
Likes: 0
Default

i'm leaning toward an electrical problem. engine runs fine when in 4 wheel dif-lock. Thanks for your help!
 
Reply
Old Jul 26, 2010 | 08:47 PM
  #6  
DODGE57HEMI's Avatar
Extreme Pro Rider
Mopar Man!
Joined: Jan 2008
Posts: 6,333
Likes: 0
From: Colorado Springs Co
Default

A electrical problem is very rare tho anything is possibility! A coil issue might a result as well!
 
Reply
Old Aug 26, 2010 | 06:57 PM
  #7  
mick4whlr's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2010
Posts: 5
Likes: 0
Default

Found out there were 3 fried wires due to electrical short. Short was caused by loose ground bolt. Appears YAMAHA's assembler failed to seat bolt tightly. Of course YAMAHA denies this. Dealer spent over 20 hours finding shorts. I'm done with YAMAHA!!
 
Reply
Old Aug 26, 2010 | 07:18 PM
  #8  
Mud Slinger's Avatar
Pro Rider
Joined: Jun 2008
Posts: 232
Likes: 0
From: Springfield, OH
Default

I hope they didn't charge you 20 hrs. labor!
 
Reply
Old Aug 27, 2010 | 11:55 AM
  #9  
mick4whlr's Avatar
Thread Starter
|
Weekend Warrior
Joined: Jul 2010
Posts: 5
Likes: 0
Default

Nope. Only 5 hours. Attempting to get that back from Yamaha. Dealer was great. Yamaha reps SUCK!
 
Reply
Old Aug 27, 2010 | 12:01 PM
  #10  
garyc660R's Avatar
Elite Pro Rider
Joined: Jan 2000
Posts: 6,996
Likes: 0
Default

Originally Posted by mick4whlr
Nope. Only 5 hours. Attempting to get that back from Yamaha. Dealer was great. Yamaha reps SUCK!
Some things never change.
 
Reply



All times are GMT -5. The time now is 02:32 AM.