Raptor TCS shocks
#1
I put the TCS triple rate fronts and the TCS Conversion on the rear of my raptor last night. Needless to say, it is a vast improvement over stock. One question though, am I missing something, or is there an easy way of adjusting the ride height on the fronts? I can hand compressed the top spring to raise ride height, but what a PITA. Anyone know better?
Also, there are 3 spacers on the shock body behind the top spring. I assume these are there to control the sag, but is there any advantage of removing one of the spacers? Since I ride trails most of the time, I don't want it to ride too low, but I could raise the ride height to compensate for the additional sag.
Also, there are 3 spacers on the shock body behind the top spring. I assume these are there to control the sag, but is there any advantage of removing one of the spacers? Since I ride trails most of the time, I don't want it to ride too low, but I could raise the ride height to compensate for the additional sag.
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)