1/4 mile TIMES!
#3
Dont ask that question here, most people will get pissed. But I have run mine at the track a few times. Bone stock it ran a 15.45 at 75mph. My friends ran a 15.32 at 76mph bone stock. I now have a 14 tooth front full Big Gun exhaust and the Pro design kit and it has run a best of 14.86 at 81.2mph. My friends runs a 14.70 at 82 mph and his is modified the same as mine except he has a GYT silencer, and he weighs about 40 lbs less than I do. Just as a comparison my 99 Shee with Pipes, filters and 15 tooth front runs a 15.02 at 80mph
#4
Thanks for the info... what pipe do you think is better on the raptor, and why? the reason I was asking out the 1/4 mile times is because I have a built mustang that ran 12's i was just curious what the time on the raptor really is. so basically exhaust, filter, cam and piston and ur in the 13's huh?
#5
I am running the Big Gun exhaust. It does not seem to be superion to any other pipe out ther as far as power goes. You would be happy with the CT, Graydon, Big Gun, and I hear that the Sparks pipe is nice but I have never seen one or seen how one runs, they are all gonna make about teh same power if they are jetted right.I dont know if cam, piston, ect would get you in the 13s, that a big difference form the 14s, but you know that since you are familiar with the strip.You had a Stang?cool was it a FoxBody?I had a 92 notch that ran 13.3s and a 93 GT that ran 13.0s both of them had about the same stuff done to them, 3.73s, Long tubes, pulleys, h-pipe, ect.
People just dont know, but nothing sounds like a Stang with a H-pipe and Flowmasters!
People just dont know, but nothing sounds like a Stang with a H-pipe and Flowmasters!
#6
I still have the 88 lx, when it rans 12.70's it had stock short block put ported e7 heads, E-cam, 24 pound injectors, 75mm mass air, edelbrock performer, Tremec TKo trans 3.73, and hillbillie dirt-boss tires.. I think thats it.. I blew up that motor and now there is a plain *** junk yard motor to pass emissions with, damn illinois.
#7