burgard a-arms
#1
I bought a set of burgard a-arms but when puting them on my rapor they dont fit well on the chasis. Do I take the caps on the end of the old a arms and put them on the new ones,
and open the part of the chasis where the screw enters. please help. Sorry for miss spell word. I speak spanish..
Thanks
and open the part of the chasis where the screw enters. please help. Sorry for miss spell word. I speak spanish..
Thanks
#2
Hey,
I have the burgard arms also but had no real problem at all except I didn't know I had to have the spindles reamed. If you have a little clearance problem, try grinding some material away from the steel inner bushing on the arms. The plastic bushing should fit very snug, and when you do the final tightening, DO NOT over tighten the bolts, instead, use locktite and snug them up. You and your bushings will thank me
I have the burgard arms also but had no real problem at all except I didn't know I had to have the spindles reamed. If you have a little clearance problem, try grinding some material away from the steel inner bushing on the arms. The plastic bushing should fit very snug, and when you do the final tightening, DO NOT over tighten the bolts, instead, use locktite and snug them up. You and your bushings will thank me
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)