Yamaha Discussions about Yamaha ATVs.

Lost High Range in a 02 Kodiak

Old Oct 4, 2001 | 03:49 AM
  #1  
400K's Avatar
Thread Starter
|
Trailblazer
Joined: Jul 2001
Posts: 26
Likes: 0
Default

Was out quadding at a rally on the weekend, by the end of the rally I didn't have high range. Put it in neutral move ahead to hi quad moves but revs real high likes its in low, low works fine, I haven't looked at it any ideas thanks
 
Reply
Old Oct 4, 2001 | 09:23 AM
  #2  
KISSSOFDEATH's Avatar
Pro Rider
Joined: Feb 2001
Posts: 1,559
Likes: 0
Default

I wish I could help but I have never heard of this happening.
 
Reply
Old Oct 4, 2001 | 09:28 AM
  #3  
NotuRaptor's Avatar
Pro Rider
Joined: May 2001
Posts: 442
Likes: 0
Default

Did you go through any water holes? Sounds like you got water in the transmission. It will still run in low when this happens (still slips some though) and pretty much doesn't run in high at all.

Check to make sure the large black plastic tube running down from under the front rack is still connected at the bottom where it goes into the transmission. Check the one in the back too. It is unlikely the back one came loose but the fronts one are known to come loose from the factory.

/NotuRaptor

 
Reply
Old Oct 4, 2001 | 11:00 AM
  #4  
JHAM's Avatar
Pro Rider
Joined: Feb 2000
Posts: 580
Likes: 0
Default

Yea, I checked my air intake to tranny and it came loose, ( actually popped out when I touched it). It's not easy getting it back in, it's in such a tight spot but got it in and tightened down good now. I'm going to check it and retighten every so often from now on. Luckily, I didn't get any water in it.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
2quiker
Yamaha
11
Mar 22, 2022 08:36 PM
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
Sep 9, 2015 09:38 AM
black_thunder
ATV Videos
6
Sep 6, 2015 04:41 PM
Steeldon
Utility ATVs
0
Sep 5, 2015 09:38 PM
ylomnstr
Kawasaki
0
Sep 4, 2015 05:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:11 PM.