I got the carbs off and jetted and cannot get them back in their rubber boots. Please help if you can, The clamps are loose and the carbs just wont seat. When the bottom is in the top is out and vise versa.

Anyone please help me

Thanks
Paul

 

Well just make sure clamps are very loses and push carbs on hard moing up and down.Dont lube, when you get them on they will slide off to easy! Good luck! Skydog[img]i/expressions/face-icon-small-mad.gif[/img]

 

I got them!!!!!!!!

I ended up getting the bottom edge in the groove and then pushing really hard on the carb and wiggling and they finnally just went in.

Jetting the carb is not all that hard, it is all the other bs that really sucks. I am just releived that I got them back on. Now on to the exhaust.

Thanks again for the suggestion
Paul