reed spacers for blaster
#1
#2
The reed spacer will give bottom end but will not hurt topend, get Boyesen or AKTIVE reeds, PLEASE DON'T BUY FMF REEDS, I had a set break. The tires depend on the terain. But I would go with 18x9.5x8 turf tamers and put on a one tooth bigger front sprocket.
------------------
Garrett Lowman; CT240 Blaster, YZ490
------------------
Garrett Lowman; CT240 Blaster, YZ490
#3
#6
Contact Trenga Racing: They are Blaster specialist, I have had very good results from them. PH (814) 231-3884
My wifes 95 Blaster has Boysen reeds, Trenga reed spacer, Kiehn 28mm PWK carb, oil injector block off, Yamalube R mixed 40:1,
Trenga front kevlar brakes and cables.
And more to come.
------------------
[This message has been edited by thumper4x4 (edited 12-22-1999).]
My wifes 95 Blaster has Boysen reeds, Trenga reed spacer, Kiehn 28mm PWK carb, oil injector block off, Yamalube R mixed 40:1,
Trenga front kevlar brakes and cables.
And more to come.
------------------
[This message has been edited by thumper4x4 (edited 12-22-1999).]
#7
Trending Topics
#8
Blasters
the guys at blaster central have tried most typical bolt ons for Blasters and have done some pretty good tyre comparisons as well, these guys really know what works and have published a great page sharing all they have found, motor on in and check em out at http://www.geocities.com/Baja/Canyon/2536/
Kiwi-Craig
Crainic@ihug.co.nz
the guys at blaster central have tried most typical bolt ons for Blasters and have done some pretty good tyre comparisons as well, these guys really know what works and have published a great page sharing all they have found, motor on in and check em out at http://www.geocities.com/Baja/Canyon/2536/
Kiwi-Craig
Crainic@ihug.co.nz
#9