One the guys that I ride with just blew up his wolverine!! We were out playing in the mud and water when it started cutting out, figuring he sucked up some water, we went back to his house to drain the carb and check the air box. He was reavving it up, to see if it would clear then all of a sudden it made a horrific sound. He quickly shut it off then tried to restart it, NO GO... it acts like there is no compression? He is taking it to the shop this weekend, (good thing its still under warrenty!! :) ) any ways I was curious if any one else has had this kind of problem?

Brad

[This message has been edited by FOREMANes (edited 12-28-1999).]

Hydrolocked the motor, sounds like... :(
Good luck with the warranty...

------------------

No, never had the problem, and I have had the whole thing submerged under the water before. Got it out started it up and took off. Good luck on the warranty, I don't know if they will do anything.
99Wolv.

We pulled the plug out and there was no water in the motor, We wern't playing in water that was more than 16"-18" deep. He had hydrolocked it before, a couple of months ago but not this time :), and yes he changed the oil several times after that to get the water out of it. I myself am kinda curious about the warranty thing to... when the rear axle bent after he rolled the bike (it only rolled over one time and stopped on its wheels) they told him to take flying leap.. and said gee looks like abuse to me, your on your own.. so we will see..

Brad

[This message has been edited by FOREMANes (edited 12-29-1999).]

Ive sunk mine twice and both of them were over the bar got towed back drained every thing and runs fine. the second time over the bars again up north 2 miles from camp.had water in the oil spark plug blown and all that stuff. changed the plug and ran it back to camp. and it still runs fine



------------------
99' Wolverine, FMF MegaMax2 Pipe, K&N jet kit and filter, OxLite brush guards,Skidplate, DuraBlue Elimanator axle and lift kit

just to let anyone that was curious know.. He broke a valve, and when that went it took out the top end. But they are going to warrenty it :) so thats the good news


------------------
Brad

99'FOREMANes, 26" BUGS, Maier full chasis skid plate, A.P. bash plate and stick guards, winch, and soon to have a high performance kit! ohhYA...

good deal!