BLOWN 99' Wolverine
#1
12-28-1999, 08:27 PM
Join Date: Jul 1999
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
One the guys that I ride with just blew up his wolverine!! We were out playing in the mud and water when it started cutting out, figuring he sucked up some water, we went back to his house to drain the carb and check the air box. He was reavving it up, to see if it would clear then all of a sudden it made a horrific sound. He quickly shut it off then tried to restart it, NO GO... it acts like there is no compression? He is taking it to the shop this weekend, (good thing its still under warrenty!! 
) any ways I was curious if any one else has had this kind of problem?
Brad
[This message has been edited by FOREMANes (edited 12-28-1999).]
) any ways I was curious if any one else has had this kind of problem?Brad
[This message has been edited by FOREMANes (edited 12-28-1999).]
#2
12-28-1999, 11:06 PM
#3
12-28-1999, 11:13 PM
#4
12-29-1999, 11:35 AM
Join Date: Jul 1999
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
We pulled the plug out and there was no water in the motor, We wern't playing in water that was more than 16"-18" deep. He had hydrolocked it before, a couple of months ago but not this time , and yes he changed the oil several times after that to get the water out of it. I myself am kinda curious about the warranty thing to... when the rear axle bent after he rolled the bike (it only rolled over one time and stopped on its wheels) they told him to take flying leap.. and said gee looks like abuse to me, your on your own.. so we will see..
Brad
[This message has been edited by FOREMANes (edited 12-29-1999).]
, and yes he changed the oil several times after that to get the water out of it. I myself am kinda curious about the warranty thing to... when the rear axle bent after he rolled the bike (it only rolled over one time and stopped on its wheels) they told him to take flying leap.. and said gee looks like abuse to me, your on your own.. so we will see..Brad
[This message has been edited by FOREMANes (edited 12-29-1999).]
#5
12-29-1999, 06:21 PM
Ive sunk mine twice and both of them were over the bar got towed back drained every thing and runs fine. the second time over the bars again up north 2 miles from camp.had water in the oil spark plug blown and all that stuff. changed the plug and ran it back to camp. and it still runs fine
------------------
99' Wolverine, FMF MegaMax2 Pipe, K&N jet kit and filter, OxLite brush guards,Skidplate, DuraBlue Elimanator axle and lift kit
------------------
99' Wolverine, FMF MegaMax2 Pipe, K&N jet kit and filter, OxLite brush guards,Skidplate, DuraBlue Elimanator axle and lift kit
#6
01-08-2000, 03:29 AM
Join Date: Jul 1999
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
just to let anyone that was curious know.. He broke a valve, and when that went it took out the top end. But they are going to warrenty it so thats the good news
------------------
Brad
99'FOREMANes, 26" BUGS, Maier full chasis skid plate, A.P. bash plate and stick guards, winch, and soon to have a high performance kit! ohhYA...
so thats the good news------------------
Brad
99'FOREMANes, 26" BUGS, Maier full chasis skid plate, A.P. bash plate and stick guards, winch, and soon to have a high performance kit! ohhYA...
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)