i just got some alba stage 3 ported cylinders for my banshee and i need to know where to start with the jetting for the pilots and the mains. i will be running these ported jugs with toomey t5s, mikuni 28mm flatslides, no airbox lid w/ proflow, boyesen power reeds, and a coolhead. anyone know what range i might be in with this setup? thanks for anyhelp dudes!

 

Just buy a jet kit with a wide range of jets. Start really rich and work your way down. Your gunna spend quite a bit of time doing this, but you should be happy in the end. G.L.

 

jet kits are a waste of money in my opinion. all i need is range of what it should be and i can fine tune it from there. some one has to have a ported shee here...

 

anybody here have an idea? id like to get the carbs tuned soon and would really like a clue where to start. any help is greatly apreciated! once again: alba stage 3 porting. toomey t5s, boyesen 2 stage reeds, 28mm mikuni flatslides, no airbox lid. pilot and main jet settings would be keen!

keep the roost up!