I just got a 36mm Mikuni high performance carb from Alba to install on my Wolverine (the stock one broke). The manual says that the carb is jetted for sea level on a warrior with a supertrapp and the suggested airbox mods. I ride at 6000 to 8000 ft and was wondering if anyone could give me some suggestions on the jetting. My mods are listed in the signatue area.

Thanks a lot for the help.

 

What is the jetting of the carb right now? I bought one used and would like to know if its been changed.
It has a 230 main with the needle in the middle position. Thanks!

 

I'm not sure of the jets, just that its jetted for sea level. I'll post the jets that are in it when I take it apart to chang them.

 

It had a 210 with the needle in the middle position. As the numbers go up do the jets get larger or smaller?