Please help raptor jetting?
#11
#14
Please help raptor jetting?
I'm at 3000' and have ridin to about 4000'. If you have'nt adjusted your idle screws yet try that first 2 1/2-3 turns out. But with a hesitation in the middle you may need 25 pilot and/or a needle with more taper. The GYT-R jet kit seems to work good without running the lid. It comes with the needles and 25 pilots and mains 145 through 165.
#15
Please help raptor jetting?
I ride at little sahara utah and saint anthonys which I believe are both about 4200 feet I have the dj kit and full white brothers exhaust I was running dj recomended jetting 144/146 but that was too rich my plug fouled and it cut out at top end was wondering what others that ride at the same place where jetted at sorry I couldnt help on the other problem
Thread
Thread Starter
Forum
Replies
Last Post
Alex Rodak
ATV Videos
2
09-13-2015 12:30 AM
Alex Rodak
Yamaha
0
09-12-2015 09:39 AM
Alex Rodak
Introduce Yourself
0
09-11-2015 11:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)