Is there away to lube? Mine seems to be a little hard to trun. I couldn't see anything that looked like I could lube.

Thanks for your help.

 

Take off the front plastic, then the gas tank. There are two bolts that hold the top of the stem mount to the frame. Remove these (you will have to bend the locking tabs back), then you can remove two plastic bushings with a couple rubber oil seals. I would replace all the plastic and rubber parts with new ones for best performance. Pack some grease inside this space where the stem would rub, then reassemble. Remember to bend the locking tabs back in place. You can also lube the bottom of the stem mount, but I have never had this apart, so I don't have any info on that process. Good Luck!

RR1