Yamaha Discussions about Yamaha ATVs.

stage 1 cam, 11:1 piston jetting

Thread Tools
 
Search this Thread
 
Old Apr 12, 2003 | 09:47 PM
  #1  
txrideblue's Avatar
Thread Starter
|
Range Rover
Joined: Apr 2002
Posts: 115
Likes: 0
Default stage 1 cam, 11:1 piston jetting

Looking for some jetting recommendations. Running lid off, pro circuit T-4, 160-165, 25 pilots, needles 1 notch down from stock. Rode about 1 hour today. Bog at 1/4 throttle when you punch it (really sucks when you roll up to a hill and punch it to jump off and do a nice nose dive!) and bogging when steady at wide open, idles nice. Pulled plug when I got home. One side of the plug was sooty but the the other side was still white with a slight tinge of tan. Need some advice here please!!!!

Thanks!!!
 
Reply
Old Apr 12, 2003 | 10:01 PM
  #2  
bluebullet's Avatar
Weekend Warrior
Joined: Mar 2003
Posts: 10
Likes: 0
Default stage 1 cam, 11:1 piston jetting

I Maybe you should try higher jetting 165 170+ check your air screw 3.5 turn conterclock i have the same thing but it is stage2 hot cam and what altitude are you
 
Reply
Old Apr 13, 2003 | 10:06 AM
  #3  
txrideblue's Avatar
Thread Starter
|
Range Rover
Joined: Apr 2002
Posts: 115
Likes: 0
Default stage 1 cam, 11:1 piston jetting

ttt
 
Reply
Old Apr 13, 2003 | 10:46 AM
  #4  
eRAPTOID's Avatar
Pro Rider
Joined: Apr 2002
Posts: 800
Likes: 0
Default stage 1 cam, 11:1 piston jetting

Damn!! I run the stage 1 HC and 11.1 JE and DynoJets 150/155, with moderate porting, clips four down from top of needle, lid off, proflow, E series......... run like a "raped ape"! Haven't been beat locally (in 8 months, since mods)!!
 
Reply
Old Apr 13, 2003 | 07:50 PM
  #5  
eRAPTOID's Avatar
Pro Rider
Joined: Apr 2002
Posts: 800
Likes: 0
Default stage 1 cam, 11:1 piston jetting

Bartlett, I'll be able to tell just how restrictive the E series is with 14 discs
as soon as I mount up my new Sparks that I'm waiting on to be built! Once
I mount it up and get the bike tweaked again,,, I'll try and remember to come back here and post my new settings with the same set-up.

Hey TX, are you still running Mikuni jets and needles? The reason I ask is, I don't see me having to go up to those high of jets with the Dyno Jets and needles, not just by changing a pipe!
 
Reply
Old Apr 13, 2003 | 10:50 PM
  #6  
txrideblue's Avatar
Thread Starter
|
Range Rover
Joined: Apr 2002
Posts: 115
Likes: 0
Default stage 1 cam, 11:1 piston jetting

I am running Mikunis and I went up to the 170-175 today and it ran much better, just a bogg of throttle which I think will be a needle adjustment. Only problem now is the friggen rod broke!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Reply
Old Apr 13, 2003 | 11:29 PM
  #7  
XtremeRaptor's Avatar
Pro Rider
Joined: Apr 2002
Posts: 641
Likes: 0
Default stage 1 cam, 11:1 piston jetting

Originally posted by: txrideblue
Only problem now is the friggen rod broke!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
That SUCKS!!!!!!!!!!!!!!!!!! Sorry to hear about your misfortune!!!!!!!!!!!!!!!
 
Reply
Old Apr 13, 2003 | 11:52 PM
  #8  
txrideblue's Avatar
Thread Starter
|
Range Rover
Joined: Apr 2002
Posts: 115
Likes: 0
Default stage 1 cam, 11:1 piston jetting

Yeah I will probably send it off to have the work done. I kinda expected this, but took a chance by not upgrading when I had it apart. It did happen sooner than I expected, I mean geez, a tank and a half of gas. How long is the wait at craycraft??
 
Reply
Old Apr 14, 2003 | 10:24 PM
  #9  
Montrealraptor's Avatar
Weekend Warrior
Joined: Aug 2002
Posts: 5
Likes: 0
Default stage 1 cam, 11:1 piston jetting

boof will see friday how is gona hit the finish line first.[img]i/expressions/face-icon-small-cool.gif[/img][img]i/expressions/face-icon-small-cool.gif[/img][img]i/expressions/face-icon-small-tongue.gif[/img][img]i/expressions/face-icon-small-cool.gif[/img]
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
exmotocrosser
Polaris
10
Sep 13, 2019 06:12 AM
2many2ride
Honda
7
Sep 27, 2015 04:35 AM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
Sep 25, 2015 01:39 PM
XxS0ccerstarxX
Honda
4
Sep 24, 2015 02:02 PM
XxS0ccerstarxX
Honda
2
Sep 22, 2015 02:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:12 PM.