1998 AC454 valve clearance??
#1
#2
#3
1998 AC454 valve clearance??
Originally posted by: Bigcat
Andy My 2002 shop manual says (cold engine) intake 0.05-0.10 mm (0.002-0.004 in.)
exhaust 0.17-0.22mm (0.007-0.009 in.)
It just reads 500cc and does not give a year they should all be the same anyway
I hope this helps.
Andy My 2002 shop manual says (cold engine) intake 0.05-0.10 mm (0.002-0.004 in.)
exhaust 0.17-0.22mm (0.007-0.009 in.)
It just reads 500cc and does not give a year they should all be the same anyway
I hope this helps.
It is the same. I checked my shop manual for my '98 454.
#4
1998 AC454 valve clearance??
sweet! thanks a lot on that. I figure after I go through the carb, drain out the fuel tank (water leaking through the weak a$$ gas guage- which will be replaced), replace the battery, and possibly install a new float kit, I might as well adjust the valves. Never has been done and this thing has about 1800 miles on it now.
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)