Questions - CPI Bullet 90cc - ATV Enthusiast Community

Go Back ATV Enthusiast Community > Brand Discussions Area > Kids Quads

LinkBack Thread Tools Search this Thread
Old 12-29-2010, 09:37 AM
Weekend Warrior
Join Date: Dec 2010
Posts: 2
Default Questions - CPI Bullet 90cc

Hey all. A buddy gave me a CPI bullet 90 that wasn't running.

I got the carb adjust to where it will run but it still isn't fantastic. I either have idle with the choke closed (and it bogs down at full throttle, under load - like it is getting too much fuel) or I can get it to scream at full throttle with the choke open (and it doesn't want to idle).

Any advice?

Also, the gas tank is leaking at the outlet spout. Where can I finda replacement? I see "generic" tanks on Ebay but I can't find anything that tells me it is a direct replacement for a CPI bullet 90.

Reply With Quote
Old 03-18-2011, 10:29 PM
Weekend Warrior
Join Date: Mar 2011
Posts: 5
Default Same problem

Hey i have the same problem with mine.Did you find out what it was because I have been trying to figure it out?
Reply With Quote
Old 03-18-2011, 10:58 PM
95wolv's Avatar
Pro Rider
Your friend needs to stop smoking whatever it is that is rotting his brain!
Join Date: Oct 1999
Location: Saginaw, MN
Posts: 3,134

You guys gotta start using the internet, I googled "CPI bullet 90", and got lots of info, including a website with a 36 page pdf file (only 18 pages total) showing all body, frame and electrical and engine parts with part numbers from Parts For Scooters ATVs buggies GoKarts Vespa Piaggio Kymco SYM PGO Aprilia Eton Apex Kinroad Carter . This took me all of maybe 2 minutes to do, including typing out this post !! There were also several other sites to check out, just google it and you will find what you need, complete with part numbers.
As far as your idling problem, its probably the pilot jet gummed up, it controls fuel flow for idling, you need to take carb apart and clean it out, it probably sat a while and got all varnished up, thats why it will run with choke or full throttle, you are bypassing the idle circuit when you do that.
Reply With Quote
Old 03-18-2011, 11:33 PM
Weekend Warrior
Join Date: Mar 2011
Posts: 5

I found that stuff..I just need a wiring diagram of it.Do u know where i can get one?
Reply With Quote
Old 03-18-2011, 11:37 PM
Weekend Warrior
Join Date: Mar 2011
Posts: 5

We have also cleaned the carborator like crazy so it is not that for sure
Reply With Quote

Similar Threads
Thread Thread Starter Forum Replies Last Post
Outlander L Tow Points bigred20653 CAN-AM (BRP) 2 10-02-2015 11:05 AM
Dinli 90 Carb Back Pressure question? MPDano 1) Engine problems.. 6 09-20-2015 10:48 PM
Baja 90cc Problem with rear brakes (shaft d'ont turn) Chasso 2) Chassis problems.. 1 09-19-2015 04:06 AM
Hi there from Texas MrTrashMan2U Introduce Yourself 2 09-09-2015 12:44 PM
Wildfire 90cc 147FMF help MrTrashMan2U 1) Engine problems.. 0 09-09-2015 12:11 PM

90, 90cc, atv, atvs, bullet, cc, childrens, cpi, diagram, info, jag, kids, manuals, parts, problems, quad, wiring

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 09:39 AM.

This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company