help Archives - Page 67 of 68 - ATVConnection.com

Tag: help

Ask the Editors: Suzuki 230 Cover

Ask the Editors: Suzuki 230 Cover

Dear ATVC: I have a 1987 Suzuki LT230E and I need to know the name of the cover behind the chain. The case saver and all is missing but the mag case is not cracked.. Thinking transmission cover but not really sure? I also need to buy that part if anyone can help.. Please my […] More »

By: | September 28, 2015


Ask the Editors: YFZ A-arm Blues

Ask the Editors: YFZ A-arm Blues

Dear ATVC: I just got an 07 Yamaha YFZ 450 SE and it has extended A-arms (which makes it lower). I was wondering if TRX A-arms would fit or what site go I go to to get stock A-arms? XxS0ccerstarxX First off, unfortunately stock Honda TRX450R A-arms are not compatible with the Yamaha YFZ units. […] More »

By: | August 31, 2015


Ask The Editors: Mojave Timing Blues

Ask The Editors: Mojave Timing Blues

Dear ATVC: I have a 1988 Kawasaki Mojave 250. When I set it on timing and try to kick it over, both intake and exhaust valves open when piston is returning to TDC. I’ve got it in a trade so I can’t really tell you the history behind it but all I know is that […] More »

By: | July 12, 2015



Ask the Editors: What Did I Fry?

Ask the Editors: What Did I Fry?

Dear ATVC: Long story short I tried hooking up the new battery in my 07 Honda Recon 250 in a hurry in the dark and hooked it up backwards. I fried the piece that goes in the battery cable with the 2 wire plug that comes out the bottom and each end of the positive […] More »

By: | June 7, 2015


Ask the Editors: How to Combat Mushy-Feeling Brakes

Ask the Editors: How to Combat Mushy-Feeling Brakes

Dear ATVC: I have a 2006 Honda TRX400EX that I love in every regard except for one: I got new brakes put on late last season and they feel mushy to me. Not as crisp as the stock ones were new. Is it because I went with cheaper aftermarket stuff rather than OEM Honda? We’re […] More »

By: | October 20, 2014


Ask the Editors: Green Gunk in Carb

Ask the Editors: Green Gunk in Carb

Dear ATVC: My quad had been sitting a few years and when I opened up the float bowl to clean out the carb, the inner walls were coated in green crust What is this and how do I get rid of it? Green is the telltale sign of corroded cast aluminum. Contrary to common misconception […] More »

By: | June 16, 2014



All times are GMT -5. The time now is 03:15 AM.