Got some questions about GY6 motor....
Jul 27, 2010 | 04:17 PM
#1
Thread Starter
|
Range Rover
Joined: Jul 2010
Posts: 146
Likes: 0
Got some questions about GY6 motor....
OK, I am going to replace the carburetor.
Should I replace it with a 30mm performance carb and intake?
If so, should I remove the air box and use a filter instead?
Also, what are your thoughts about changing the CDI, Coil, and carb/intake?
Performance 30mm Carburetor Intake Coil CDI 150cc GY6: eBay Motors (item 350248653684 end time Jul-31-10 09:19:45 PDT)
The bike is about 6 or 7 years old and the carb is all gummed up. Being aware that the motor has wear, I thought the upgrades might help compensate a little.
Thoughts?
Should I replace it with a 30mm performance carb and intake?
If so, should I remove the air box and use a filter instead?
Also, what are your thoughts about changing the CDI, Coil, and carb/intake?
Performance 30mm Carburetor Intake Coil CDI 150cc GY6: eBay Motors (item 350248653684 end time Jul-31-10 09:19:45 PDT)
The bike is about 6 or 7 years old and the carb is all gummed up. Being aware that the motor has wear, I thought the upgrades might help compensate a little.
Thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
Sep 25, 2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)