jianshe 400

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2013 | 01:48 PM

dsinnott

Thread Starter

Weekend Warrior

Joined: Feb 2013

Posts: 18

Likes: 0

jianshe 400

I have. Jianshe 400 that I need to rebuild. I know this is. Big bear clone.... will the big Bea parts fit?

Feb 23, 2013 | 03:19 PM

dsinnott

Thread Starter

Weekend Warrior

Joined: Feb 2013

Posts: 18

Likes: 0

Just compared the big bear 400 to my jianshe, the parts are interchangeable.... the big bear clutch discs are a bit smaller but work, also the piston is 10mm larger but the top end will bolt right up.

Feb 23, 2013 | 04:29 PM

mikertldg

Weekend Warrior

Joined: Aug 2012

Posts: 21

Likes: 0

The mechanical parts are but don't think any if the electrical will. I know the starter will and the clutch plates too

Feb 23, 2013 | 04:29 PM

mikertldg

Weekend Warrior

Joined: Aug 2012

Posts: 21

Likes: 0

Good to hear bout the piston

Feb 23, 2013 | 04:32 PM

dsinnott

Thread Starter

Weekend Warrior

Joined: Feb 2013

Posts: 18

Likes: 0

The electrostatic are different but c
an be modified

Feb 23, 2013 | 06:00 PM

mikertldg

Weekend Warrior

Joined: Aug 2012

Posts: 21

Likes: 0

How do you like your bike? My runs good so far! I had to put a clutch and starter and cdi in mine.

Feb 23, 2013 | 06:20 PM

dsinnott

Thread Starter

Weekend Warrior

Joined: Feb 2013

Posts: 18

Likes: 0

I think its great. Now that I can get parts for it. The engine is a tank.. not a lot on the top end but good low end torque

jianshe 400

jianshe 400

Trending Topics