Hello there I have a new to me 2009 Odes 400 4x4 atv I have done some research and i know that it's a honda clone motor and mainly a honda rancher clone. Funny thing is that I actually have a rancher aswell but ofcourse the issues on the Odes arnt on the rancher at all.

Problem / request 1) 4x4 switch is not engaging 4x4 no noise. / is was flickering on the display for a few seconds.
> followed the wiring down and bingo there is the problem out of the 3 wires only the ²or³ prong tringle connector was plugged into the black box the other 2 where open and I cant seem to find anything for them. If someone has some pictures of their wiring that would be awsome or a wiring diagram.

Problem 2) is the rear end. either CV axles or the differential itself is knocking so once taken apart and determined what's my best route on parts can I get a name brand axle like you can parts for the clone motor from honda or am I stuck with Chinese brand and ordering options too please

pictures hopefully attached more to come

thank you for reading

 

I have just Googled Odes and they are still trading. The Honda 350 clone was what they are best known for, and you may be able to get some info from them .https://odesindustries.com/ However you may not, I am trying to get info on a Quadzilla 250 that was Quadzilla's big seller 10 years ago (Honda Rebel clone engine) and can't get any sense out of either importer or local dealer.

 

Thank you have looked there unfortunately they have little to no information about the 2009 models or really anything before 2015 ish and the problem with the Honda clone part is that the honda is always 4x4 where the odes is 4x4 on the fly and cant follow anything on the honda for a reference

 

It probably depends if the current importer was the same one as in 2009 but you could try phoning them to find out if they do have info on 09 models. Also the switchable 4WD and rear driveshaft arrangement may be what they still use on the current range.