Quaders,
I recently installed FMF (chrome, not nickel) with Power Cores, reeds, reed spacers, boost bottle and it all went pretty smoothly, but i do have a concern. I have done some riding with the new pipes, but it is rich so I prolly have no more than 45 minutes total run time since the pipes were installed. Now the concern: The right side near the cylinder in getting discolored already (about 8 inches from the cyl.), while the left looks brand new still. I knew they would discolor, but I expected both pipes to discolor at roughly the same time. Any suggestions? Im running 260 mains with needle in the stock position.
Thanks for your help...

RoostKing